21. jul 2009, 12:35
#68199
Hej
Jeg ville lige dele disse indstillinger med jer, som jeg har copy/pastet direkte fra avforums.com.
Jeg bruger dem selv, og synes de ser rigtig godt ud på mit 42 tommer PQ6000:
These settings has been calibrated using Eye1 on a 50PQ6000 .
Initially with Energy saver OFF, so expect colours only to match true calibration when its off.
Energy saver can of course be enabled and still work out quite well with these settings.
Contrast: 90
Brightness: 30
H-sharpness 52
V-sharpness 52
Colour: 50
Colourtone: 0
Dyn contrast OFF
noisereduction OFF
Gamma: Hígh
Black level Low
Colourstandard: SD
Colour area: Wide
Whitebalance: COLD
red gain: 4
green gain: 0
blue gain: -48
red offset: 34
green offset: 31
blue offset: 41
No CMS colours are updated at this stage, simply took too long to calibrate..
You can add those into an "expert1" settings and test, and hopefully you can use them on your screen too.
Jeg håber i kan bruge dem til noget... jeg ved jeg kunne
Jeg ville lige dele disse indstillinger med jer, som jeg har copy/pastet direkte fra avforums.com.
Jeg bruger dem selv, og synes de ser rigtig godt ud på mit 42 tommer PQ6000:
These settings has been calibrated using Eye1 on a 50PQ6000 .
Initially with Energy saver OFF, so expect colours only to match true calibration when its off.
Energy saver can of course be enabled and still work out quite well with these settings.
Contrast: 90
Brightness: 30
H-sharpness 52
V-sharpness 52
Colour: 50
Colourtone: 0
Dyn contrast OFF
noisereduction OFF
Gamma: Hígh
Black level Low
Colourstandard: SD
Colour area: Wide
Whitebalance: COLD
red gain: 4
green gain: 0
blue gain: -48
red offset: 34
green offset: 31
blue offset: 41
No CMS colours are updated at this stage, simply took too long to calibrate..
You can add those into an "expert1" settings and test, and hopefully you can use them on your screen too.
Jeg håber i kan bruge dem til noget... jeg ved jeg kunne